견적서 요청 이메일 yale0720@naver.com

  • 초음파두께측정기 (MVX)

DAKOTA

초음파두께측정기 (MVX)

5,060,000원 3,102,000원
원산지
미국
배송정보
0원 (조건부배송) 주문시결제(선결제)
택배
■ 특징 콤펙트하고 외부 충격에 강한 외형 가변 정방파 펄서를 사용하여 고분해능과 고침투형 필요에 유연하게 세팅 작동 중 생파형, 종류 파형 그리고 스캔 바와 함께 표시되는 대형 디지트 등의 화면 선택 기능 여러 다양한 싱글 탐촉자 사용 - 스탠다드 딜레이라인:아크릴 혹은 그래파이트를 딜레이로 사용하여 금속 및 얇은플라스틱 측정 - 연필 타입 딜레이라인: 측정 부위가 좁은 검사물 - 콘택트 타입: 여러 분야에 적용 16개의 공장 세팅, 48개의 사용자 설정 셋업, 사용자 설정 셋업은 적용점에 따라 편집 보고서 작성을 위한 알파벳-숫자 데이터 로거 ■ Measurement Modes: Pulse-Echo (Precision General purpose). Interface-Echo (Precision - Thick materials). Echo-Echo (Precision - Thin materials & thru-paint). Pulser: Square wave pulser with adjustable pulse width (spike, thin, wide). Receiver: Manual or AGC gain control with 40dB range, depending on mode selected. Timing: 40 MHz with ultra low power and 8 bit digitizer. ■ Power Source Three 1.5V alkaline or 1.2V NiCad AA cells. Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included.) Auto power off if idle 5 min. Battery status meter. ■ Measuring Range: Interface-Echo Mode: Steel 0.05 1.0 in (1.27mm - 25.4mm). Plastics from .005in. (127mm). Echo-Echo Mode: Steel .006in -.500in (.15mm - 12.7mm). Pulse-Echo Contact: Steel .040in - 10.0in (1mm - 254mm). Plastics from .010in (.254mm). Echo-Echo Contact: Steel thru-paint .100in - 3.0in (2.54mm - 76.2mm). Resolution (selectable): +/- .001in (0.01 mm), or +/- .0001in - (.001mm). Velocity Range: .0492 to .3936 in./ms 1250 to 9999 meters/sec Single and Two point calibration option, or selection of basic material types. Units: English & Metric ■ Display Display Views: - A-Scan - Rectified +/- (half wave view) RF (full waveform view) - B-Scan - Time based cross section view. Display speed of 15 seconds per screen. Large Digits Standard thickness view. Digit Height: 0.400 in (10mm). Scan Bar Thickness - 6 readings per second. Viewable in B-Scan and Large Digit views. Repeatability Bar Graph - Bar graph indicates stability of reading. ■ Data Logger 12,000 readings and waveforms (alpha numeric storage). OBSTRUCT to indicate inaccessible locations. Memory: 16 megabit non-volatile ram. ■ Transducer Transducer Types: Single Element (1 to 20 MHz). Locking quick disconnect “ 00” LEMO connector. Standard 4 foot long integral cable. Custom transducer and cable lengths available. ■ Features Setups: 16 factory and 48 user-defined setups. Gates: Single gate in pulse-echo mode. Single gate with hold-off in interface-echo, echo-echo, and plastics mode. Adjustable threshold. Multiple Measurement Modes: Selectable modes for use with a variety of applications. Alarm Mode: Set hi and lo tolerances with audible beeper and visual LEDs. Fast-Scan Mode: Takes 32 readings per second and displays the minimum reading found when the transducer is removed. Display continuously updates while scanning. ■ Certification Factory calibration traceable to national standards.

비밀번호 인증

비밀번호를 입력해 주세요.

확인